SFSLinux. Самоделка.

[code=php]--> WvDial: Internet dialer version 1.61
--> Cannot set information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT#777
--> Waiting for carrier.
ATM1L3DT#777
CONNECT
~[7f]}#@!}!}!} }8}"}&} } } } }#}$@#}%}& [06][11]}5}'}"}(}"7I~
--> Carrier detected.  Waiting for prompt.
~[7f]}#@!}!}"} }8}"}&} } } } }#}$@#}%}& [06][11]}5}'}"}(}"}][~
--> PPP negotiation detected.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.
~[7f]}#@!}!}#} }8}"}&} } } } }#}$@#}%}& [06][11]}5}'}"}(}"4R~
--> PPP negotiation detected.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.
~[7f]}#@!}!}$} }8}"}&} } } } }#}$@#}%}& [06][11]}5}'}"}(}"xw~
--> PPP negotiation detected.
--> Unable to run /usr/sbin/pppd.
[/code]

[Modem0]
Modem = /dev/ttyUSB0
Baud = 460800
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
Init2 = AT$QCMIP=0

FlowControl = CRTSCTS

[Dialer defaults]
Phone = #777
Password = IT
Username = IT
Stupid Mode = 0
Inherits = Modem0
New PPPD = 1

[Dialer test]
Phone = #777
Password = IT_TEST
Username = IT_TEST
Stupid Mode = 0
Inherits = Modem0
New PPPD = 1

[code=php][Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
; Phone = <Target Phone Number>
; Password = <Your Password>
; Username = <Your Login Name>[/code]

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
; Phone = #777
; Password = IT
; Username = IT

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
; Phone = <#777>
; Password = <IT>
; Username = <IT>